pub(super) struct Executor<TContext> {
context: ContextCell<TContext>,
execution_node: TempoFullNode,
mailbox: UnboundedReceiver<Message>,
marshal: Mailbox<Scheme<PublicKey, MinSig>, Block>,
my_mailbox: ExecutorMailbox,
last_canonicalized: LastCanonicalized,
}Fields§
§context: ContextCell<TContext>§execution_node: TempoFullNodeA handle to the execution node layer. Used to forward finalized blocks and to update the canonical chain by sending forkchoice updates.
mailbox: UnboundedReceiver<Message>The channel over which the agent will receive new commands from the application actor.
marshal: Mailbox<Scheme<PublicKey, MinSig>, Block>The mailbox of the marshal actor. Used to backfill blocks.
my_mailbox: ExecutorMailboxThe mailbox passed to other parts of the system to forward messages to the agent.
last_canonicalized: LastCanonicalizedImplementations§
Source§impl<TContext> Executor<TContext>where
TContext: Metrics + Pacer + Spawner,
impl<TContext> Executor<TContext>where
TContext: Metrics + Pacer + Spawner,
pub(super) fn mailbox(&self) -> &ExecutorMailbox
pub(super) fn start(self) -> Handle<()>
async fn run(self)
async fn handle_message(&mut self, message: Message)
Sourceasync fn canonicalize(
&mut self,
cause: Span,
head_or_finalized: HeadOrFinalized,
height: u64,
digest: Digest,
ack: Sender<()>,
) -> Result<()>
async fn canonicalize( &mut self, cause: Span, head_or_finalized: HeadOrFinalized, height: u64, digest: Digest, ack: Sender<()>, ) -> Result<()>
Canonicalizes digest by sending a forkchoice update to the execution layer.
Sourceasync fn forward_finalized(
&mut self,
cause: Span,
block: Block,
acknowledgment: Exact,
) -> Result<()>
async fn forward_finalized( &mut self, cause: Span, block: Block, acknowledgment: Exact, ) -> Result<()>
Finalizes block by sending it to the execution layer.
If response is set, block is considered to at the tip of the
finalized chain. The agent will also confirm the finalization by
responding on that channel and set the digest as the latest finalized
head.
The agent will also cache digest as the latest finalized digest.
The agent does not update the forkchoice state of the execution layer
here but upon serving a Command::Canonicalize request.
If response is not set the agent assumes that block is an older
block backfilled from the consensus layer.
§Invariants
It is critical that a newer finalized block is always send after an older finalized block. This is standard behavior of the commonmware marshal agent.
Auto Trait Implementations§
impl<TContext> Freeze for Executor<TContext>where
TContext: Freeze,
impl<TContext> !RefUnwindSafe for Executor<TContext>
impl<TContext> Send for Executor<TContext>where
TContext: Send,
impl<TContext> Sync for Executor<TContext>where
TContext: Sync,
impl<TContext> Unpin for Executor<TContext>where
TContext: Unpin,
impl<TContext> !UnwindSafe for Executor<TContext>
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
§impl<T> Conv for T
impl<T> Conv for T
§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
Causes
self to use its Binary implementation when Debug-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
Causes
self to use its Display implementation when
Debug-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
Causes
self to use its LowerExp implementation when
Debug-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
Causes
self to use its LowerHex implementation when
Debug-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
Causes
self to use its Octal implementation when Debug-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
Causes
self to use its Pointer implementation when
Debug-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
Causes
self to use its UpperExp implementation when
Debug-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
Causes
self to use its UpperHex implementation when
Debug-formatted.§fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
Formats each item in a sequence. Read more
§impl<TxEnv, T> FromRecoveredTx<&T> for TxEnvwhere
TxEnv: FromRecoveredTx<T>,
impl<TxEnv, T> FromRecoveredTx<&T> for TxEnvwhere
TxEnv: FromRecoveredTx<T>,
§fn from_recovered_tx(tx: &&T, sender: Address) -> TxEnv
fn from_recovered_tx(tx: &&T, sender: Address) -> TxEnv
Builds a [
TxEnv] from a transaction and a sender address.§impl<TxEnv, T> FromTxWithEncoded<&T> for TxEnvwhere
TxEnv: FromTxWithEncoded<T>,
impl<TxEnv, T> FromTxWithEncoded<&T> for TxEnvwhere
TxEnv: FromTxWithEncoded<T>,
§fn from_encoded_tx(tx: &&T, sender: Address, encoded: Bytes) -> TxEnv
fn from_encoded_tx(tx: &&T, sender: Address, encoded: Bytes) -> TxEnv
Builds a [
TxEnv] from a transaction, its sender, and encoded transaction bytes.§impl<T> FutureExt for T
impl<T> FutureExt for T
§fn with_context(self, otel_cx: Context) -> WithContext<Self>
fn with_context(self, otel_cx: Context) -> WithContext<Self>
§fn with_current_context(self) -> WithContext<Self>
fn with_current_context(self) -> WithContext<Self>
§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
Converts
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
Converts
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read more§impl<T> IntoRequest<T> for T
impl<T> IntoRequest<T> for T
§fn into_request(self) -> Request<T>
fn into_request(self) -> Request<T>
Wrap the input message
T in a tonic::Request§impl<L> LayerExt<L> for L
impl<L> LayerExt<L> for L
§fn named_layer<S>(&self, service: S) -> Layered<<L as Layer<S>>::Service, S>where
L: Layer<S>,
fn named_layer<S>(&self, service: S) -> Layered<<L as Layer<S>>::Service, S>where
L: Layer<S>,
Applies the layer to a service and wraps it in [
Layered].§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling [Attribute] value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi [Quirk] value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the [Condition] value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
Pipes by value. This is generally the method you want to use. Read more
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
Borrows
self and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
Mutably borrows
self and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
Borrows
self, then passes self.as_ref() into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
Mutably borrows
self, then passes self.as_mut() into the pipe
function.§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
Borrows
self, then passes self.deref() into the pipe function.§impl<T> Pointable for T
impl<T> Pointable for T
§impl<T> PolicyExt for Twhere
T: ?Sized,
impl<T> PolicyExt for Twhere
T: ?Sized,
§impl<T> ServiceExt for T
impl<T> ServiceExt for T
§fn propagate_header(self, header: HeaderName) -> PropagateHeader<Self>where
Self: Sized,
fn propagate_header(self, header: HeaderName) -> PropagateHeader<Self>where
Self: Sized,
Available on crate feature
propagate-header only.Propagate a header from the request to the response. Read more
§fn add_extension<T>(self, value: T) -> AddExtension<Self, T>where
Self: Sized,
fn add_extension<T>(self, value: T) -> AddExtension<Self, T>where
Self: Sized,
Available on crate feature
add-extension only.Add some shareable value to request extensions. Read more
§fn map_request_body<F>(self, f: F) -> MapRequestBody<Self, F>where
Self: Sized,
fn map_request_body<F>(self, f: F) -> MapRequestBody<Self, F>where
Self: Sized,
Available on crate feature
map-request-body only.Apply a transformation to the request body. Read more
§fn map_response_body<F>(self, f: F) -> MapResponseBody<Self, F>where
Self: Sized,
fn map_response_body<F>(self, f: F) -> MapResponseBody<Self, F>where
Self: Sized,
Available on crate feature
map-response-body only.Apply a transformation to the response body. Read more
§fn compression(self) -> Compression<Self>where
Self: Sized,
fn compression(self) -> Compression<Self>where
Self: Sized,
Available on crate features
compression-br or compression-deflate or compression-gzip or compression-zstd only.Compresses response bodies. Read more
§fn decompression(self) -> Decompression<Self>where
Self: Sized,
fn decompression(self) -> Decompression<Self>where
Self: Sized,
Available on crate features
decompression-br or decompression-deflate or decompression-gzip or decompression-zstd only.Decompress response bodies. Read more
§fn trace_for_http(self) -> Trace<Self, SharedClassifier<ServerErrorsAsFailures>>where
Self: Sized,
fn trace_for_http(self) -> Trace<Self, SharedClassifier<ServerErrorsAsFailures>>where
Self: Sized,
Available on crate feature
trace only.High level tracing that classifies responses using HTTP status codes. Read more
§fn trace_for_grpc(self) -> Trace<Self, SharedClassifier<GrpcErrorsAsFailures>>where
Self: Sized,
fn trace_for_grpc(self) -> Trace<Self, SharedClassifier<GrpcErrorsAsFailures>>where
Self: Sized,
Available on crate feature
trace only.High level tracing that classifies responses using gRPC headers. Read more
§fn follow_redirects(self) -> FollowRedirect<Self>where
Self: Sized,
fn follow_redirects(self) -> FollowRedirect<Self>where
Self: Sized,
Available on crate feature
follow-redirect only.§fn sensitive_headers(
self,
headers: impl IntoIterator<Item = HeaderName>,
) -> SetSensitiveRequestHeaders<SetSensitiveResponseHeaders<Self>>where
Self: Sized,
fn sensitive_headers(
self,
headers: impl IntoIterator<Item = HeaderName>,
) -> SetSensitiveRequestHeaders<SetSensitiveResponseHeaders<Self>>where
Self: Sized,
Available on crate feature
sensitive-headers only.§fn sensitive_request_headers(
self,
headers: impl IntoIterator<Item = HeaderName>,
) -> SetSensitiveRequestHeaders<Self>where
Self: Sized,
fn sensitive_request_headers(
self,
headers: impl IntoIterator<Item = HeaderName>,
) -> SetSensitiveRequestHeaders<Self>where
Self: Sized,
Available on crate feature
sensitive-headers only.§fn sensitive_response_headers(
self,
headers: impl IntoIterator<Item = HeaderName>,
) -> SetSensitiveResponseHeaders<Self>where
Self: Sized,
fn sensitive_response_headers(
self,
headers: impl IntoIterator<Item = HeaderName>,
) -> SetSensitiveResponseHeaders<Self>where
Self: Sized,
Available on crate feature
sensitive-headers only.§fn override_request_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetRequestHeader<Self, M>where
Self: Sized,
fn override_request_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetRequestHeader<Self, M>where
Self: Sized,
Available on crate feature
set-header only.Insert a header into the request. Read more
§fn append_request_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetRequestHeader<Self, M>where
Self: Sized,
fn append_request_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetRequestHeader<Self, M>where
Self: Sized,
Available on crate feature
set-header only.Append a header into the request. Read more
§fn insert_request_header_if_not_present<M>(
self,
header_name: HeaderName,
make: M,
) -> SetRequestHeader<Self, M>where
Self: Sized,
fn insert_request_header_if_not_present<M>(
self,
header_name: HeaderName,
make: M,
) -> SetRequestHeader<Self, M>where
Self: Sized,
Available on crate feature
set-header only.Insert a header into the request, if the header is not already present. Read more
§fn override_response_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetResponseHeader<Self, M>where
Self: Sized,
fn override_response_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetResponseHeader<Self, M>where
Self: Sized,
Available on crate feature
set-header only.Insert a header into the response. Read more
§fn append_response_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetResponseHeader<Self, M>where
Self: Sized,
fn append_response_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetResponseHeader<Self, M>where
Self: Sized,
Available on crate feature
set-header only.Append a header into the response. Read more
§fn insert_response_header_if_not_present<M>(
self,
header_name: HeaderName,
make: M,
) -> SetResponseHeader<Self, M>where
Self: Sized,
fn insert_response_header_if_not_present<M>(
self,
header_name: HeaderName,
make: M,
) -> SetResponseHeader<Self, M>where
Self: Sized,
Available on crate feature
set-header only.Insert a header into the response, if the header is not already present. Read more
§fn set_request_id<M>(
self,
header_name: HeaderName,
make_request_id: M,
) -> SetRequestId<Self, M>where
Self: Sized,
M: MakeRequestId,
fn set_request_id<M>(
self,
header_name: HeaderName,
make_request_id: M,
) -> SetRequestId<Self, M>where
Self: Sized,
M: MakeRequestId,
Available on crate feature
request-id only.Add request id header and extension. Read more
§fn set_x_request_id<M>(self, make_request_id: M) -> SetRequestId<Self, M>where
Self: Sized,
M: MakeRequestId,
fn set_x_request_id<M>(self, make_request_id: M) -> SetRequestId<Self, M>where
Self: Sized,
M: MakeRequestId,
Available on crate feature
request-id only.Add request id header and extension, using
x-request-id as the header name. Read more§fn propagate_request_id(
self,
header_name: HeaderName,
) -> PropagateRequestId<Self>where
Self: Sized,
fn propagate_request_id(
self,
header_name: HeaderName,
) -> PropagateRequestId<Self>where
Self: Sized,
Available on crate feature
request-id only.Propgate request ids from requests to responses. Read more
§fn propagate_x_request_id(self) -> PropagateRequestId<Self>where
Self: Sized,
fn propagate_x_request_id(self) -> PropagateRequestId<Self>where
Self: Sized,
Available on crate feature
request-id only.Propgate request ids from requests to responses, using
x-request-id as the header name. Read more§fn catch_panic(self) -> CatchPanic<Self, DefaultResponseForPanic>where
Self: Sized,
fn catch_panic(self) -> CatchPanic<Self, DefaultResponseForPanic>where
Self: Sized,
Available on crate feature
catch-panic only.Catch panics and convert them into
500 Internal Server responses. Read more§fn request_body_limit(self, limit: usize) -> RequestBodyLimit<Self>where
Self: Sized,
fn request_body_limit(self, limit: usize) -> RequestBodyLimit<Self>where
Self: Sized,
Available on crate feature
limit only.Intercept requests with over-sized payloads and convert them into
413 Payload Too Large responses. Read more§fn trim_trailing_slash(self) -> NormalizePath<Self>where
Self: Sized,
fn trim_trailing_slash(self) -> NormalizePath<Self>where
Self: Sized,
Available on crate feature
normalize-path only.Remove trailing slashes from paths. Read more
§fn append_trailing_slash(self) -> NormalizePath<Self>where
Self: Sized,
fn append_trailing_slash(self) -> NormalizePath<Self>where
Self: Sized,
Available on crate feature
normalize-path only.Append trailing slash to paths. Read more
§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Immutable access to the
Borrow<B> of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
Mutable access to the
BorrowMut<B> of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
Immutable access to the
AsRef<R> view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
Mutable access to the
AsMut<R> view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Immutable access to the
Deref::Target of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Mutable access to the
Deref::Target of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
Calls
.tap() only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls
.tap_mut() only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
Calls
.tap_borrow() only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
Calls
.tap_borrow_mut() only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
Calls
.tap_ref() only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
Calls
.tap_ref_mut() only in debug builds, and is erased in release
builds.§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
Calls
.tap_deref() only in debug builds, and is erased in release
builds.§impl<T> TryConv for T
impl<T> TryConv for T
§impl<T> WithSubscriber for T
impl<T> WithSubscriber for T
§fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where
S: Into<Dispatch>,
§fn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Source§impl<T> WithSubscriber for T
impl<T> WithSubscriber for T
Source§fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where
S: Into<Dispatch>,
Source§fn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
impl<T> ErasedDestructor for Twhere
T: 'static,
impl<T> MaybeSend for Twhere
T: Send,
Layout§
Note: Unable to compute type layout, possibly due to this type having generic parameters. Layout can only be computed for concrete, fully-instantiated types.