Enum ITIP FeeAMM Errors &nbsp; Copy item path

InternalError(InternalError)

Implementations§

impl ITIPFeeAMMErrors

pub const SELECTORS: &'static [[u8; 4]]

All the selectors of this enum.

Note that the selectors might not be in the same order as the variants. No guarantees are made about the order of the selectors.

Prefer using SolInterface methods instead.

pub const VARIANT_NAMES: &'static [&'static str]

The names of the variants in the same order as SELECTORS.

pub const SIGNATURES: &'static [&'static str]

The signatures in the same order as SELECTORS.

pub fn signature_by_selector(selector: [u8; 4]) -> Option<&'static str>

Returns the signature for the given selector, if known.

pub fn name_by_selector(selector: [u8; 4]) -> Option<&'static str>

Returns the enum variant name for the given selector, if known.

impl TIPFeeAMMError

pub const fn identical_addresses() -> Self

Creates an error for identical token addresses.

pub const fn zero_address() -> Self

Creates an error for zero address.

pub const fn pool_exists() -> Self

Creates an error when pool already exists.

pub const fn pool_does_not_exist() -> Self

Creates an error when pool does not exist.

pub const fn invalid_token() -> Self

Creates an error for invalid token.

pub const fn insufficient_liquidity() -> Self

Creates an error for insufficient liquidity.

pub const fn insufficient_pool_balance() -> Self

Creates an error for insufficient pool balance.

pub const fn insufficient_reserves() -> Self

Creates an error for insufficient reserves.

pub const fn insufficient_liquidity_balance() -> Self

Creates an error for insufficient liquidity balance.

pub const fn must_deposit_lower_balance_token() -> Self

Creates an error when must deposit lower balance token.

pub const fn invalid_amount() -> Self

Creates an error for invalid amount.

pub const fn token_transfer_failed() -> Self

Creates an error for token transfer failure.

pub const fn invalid_swap_calculation() -> Self

Creates an error for invalid swap calculation.

pub const fn insufficient_liquidity_for_pending() -> Self

Creates an error for insufficient liquidity for pending operations.

pub const fn division_by_zero() -> Self

Creates an error for division by zero.

pub const fn invalid_new_reserves() -> Self

Creates an error for invalid new reserves.

pub const fn internal_error() -> Self

Creates an error for internal errors.

Trait Implementations§

impl Clone for ITIPFeeAMMErrors

fn clone(&self) -> ITIPFeeAMMErrors

Returns a duplicate of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for ITIPFeeAMMErrors

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl PartialEq for ITIPFeeAMMErrors

fn eq(&self, other: &ITIPFeeAMMErrors) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl SolInterface for ITIPFeeAMMErrors

const NAME: &'static str = "ITIPFeeAMMErrors"

The name of this type.

const MIN_DATA_LENGTH: usize = 0usize

The minimum length of the data for this type. Read more

const COUNT: usize = 21usize

The number of variants.

fn selector(&self) -> [u8; 4]

The selector of this instance.

fn selector_at(i: usize) -> Option<[u8; 4]>

The selector of this type at the given index, used in selectors. Read more

fn valid_selector(selector: [u8; 4]) -> bool

Returns true if the given selector is known to this type.

fn abi_decode_raw(selector: [u8; 4], data: &[u8]) -> Result<Self>

ABI-decodes the given data into one of the variants of self.

fn abi_decode_raw_validate(selector: [u8; 4], data: &[u8]) -> Result<Self>

ABI-decodes the given data into one of the variants of self, with validation. Read more

fn abi_encoded_size(&self) -> usize

The size of the encoded data, without any selectors.

fn abi_encode_raw(&self, out: &mut Vec<u8>)

ABI-encodes self into the given buffer, without any selectors.

fn type_check(selector: [u8; 4]) -> Result<(), Error>

Returns an error if the given selector is not known to this type.

fn selectors() -> Selectors<Self>

Returns an iterator over the selectors of this type.

fn abi_encode(&self) -> Vec<u8> ⓘ

ABI-encodes self into the given buffer.

fn abi_decode(data: &[u8]) -> Result<Self, Error>

ABI-decodes the given data into one of the variants of self.

fn abi_decode_validate(data: &[u8]) -> Result<Self, Error>

ABI-decodes the given data into one of the variants of self, with validation. Read more

impl StructuralPartialEq for ITIPFeeAMMErrors

Auto Trait Implementations§

impl Freeze for ITIPFeeAMMErrors

impl RefUnwindSafe for ITIPFeeAMMErrors

impl Send for ITIPFeeAMMErrors

impl Sync for ITIPFeeAMMErrors

impl Unpin for ITIPFeeAMMErrors

impl UnwindSafe for ITIPFeeAMMErrors

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dest. Read more

impl<T> Conv for T

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<T> Pipe for T
where T: ?Sized,

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.

impl<T> PolicyExt for T
where T: ?Sized,

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] only if self and other return Action::Follow. Read more

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] if either self or other returns Action::Follow. Read more

impl<T> Same for T

type Output = T

Should always be Self

impl<T> ServiceExt for T

fn propagate_header(self, header: HeaderName) -> PropagateHeader<Self>
where Self: Sized,

Available on crate feature propagate-header only.

Propagate a header from the request to the response. Read more

fn add_extension<T>(self, value: T) -> AddExtension<Self, T>
where Self: Sized,

Available on crate feature add-extension only.

Add some shareable value to request extensions. Read more

fn map_request_body<F>(self, f: F) -> MapRequestBody<Self, F>
where Self: Sized,

Available on crate feature map-request-body only.

Apply a transformation to the request body. Read more

fn map_response_body<F>(self, f: F) -> MapResponseBody<Self, F>
where Self: Sized,

Available on crate feature map-response-body only.

Apply a transformation to the response body. Read more

fn compression(self) -> Compression<Self>
where Self: Sized,

Available on crate features compression-br or compression-deflate or compression-gzip or compression-zstd only.

Compresses response bodies. Read more

fn decompression(self) -> Decompression<Self>
where Self: Sized,

Available on crate features decompression-br or decompression-deflate or decompression-gzip or decompression-zstd only.

Decompress response bodies. Read more

fn trace_for_http(self) -> Trace<Self, SharedClassifier<ServerErrorsAsFailures>>
where Self: Sized,

Available on crate feature trace only.

High level tracing that classifies responses using HTTP status codes. Read more

fn trace_for_grpc(self) -> Trace<Self, SharedClassifier<GrpcErrorsAsFailures>>
where Self: Sized,

Available on crate feature trace only.

High level tracing that classifies responses using gRPC headers. Read more

fn follow_redirects(self) -> FollowRedirect<Self>
where Self: Sized,

Available on crate feature follow-redirect only.

Follow redirect resposes using the Standard policy. Read more

fn sensitive_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveRequestHeaders<SetSensitiveResponseHeaders<Self>>
where Self: Sized,

Available on crate feature sensitive-headers only.

Mark headers as sensitive on both requests and responses. Read more

fn sensitive_request_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveRequestHeaders<Self>
where Self: Sized,

Available on crate feature sensitive-headers only.

Mark headers as sensitive on requests. Read more

fn sensitive_response_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveResponseHeaders<Self>
where Self: Sized,

Available on crate feature sensitive-headers only.

Mark headers as sensitive on responses. Read more